Removal

General
Description: Removal of the Gori propellers requires the proper Gori tool kit.
Notes

• The screws MUST be marked and installed in the EXACT same location, do not mix them up
  
• To remove the locking nut

1. Remove Allen key (using spanner wrench)
2. Remove flexible bushing
3. Use a strap wrench to keep shaft from spinning
   

• Check for wear

1. Each pin on each blade
2. Wear on faces of hub
3. Wear on each blade
   

• Reassembly: hardware requiring Loc-tite (243) sealant applied must be allowed to set with adequate time