Removal

From Seawind1160Wiki
Revision as of 10:24, 12 September 2026 by SwWikiAdminUser (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

General
Description: Removal of the Gori propellers requires the proper Gori tool kit.
Notes

  • The screws MUST be marked and installed in the EXACT same location, do not mix them up
  • To remove the locking nut
  1. Remove Allen key (using spanner wrench)
  2. Remove flexible bushing
  3. Use a strap wrench to keep shaft from spinning
  • Check for wear
  1. Each pin on each blade
  2. Wear on faces of hub
  3. Wear on each blade
  • Reassembly: hardware requiring Loc-tite (243) sealant applied must be allowed to set with adequate time
Retrieved from "https://strikhedonia.com/Seawind1160Wiki/index.php?title=Removal&oldid=930"