Removal

From Seawind1160Wiki
Revision as of 18:27, 25 May 2026 by SwWikiAdminUser (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Tips

  1. Gori hardware needs Loc-tite (243) applied and allowed to set with adequate time
  2. Check for wear; 1. Each pin on each blade 2. Wear on faces of hub 3. Wear on each blade
  3. The screws MUST be marked and installed in the EXACT same location, do not mix them up
  4. To remove the locking nut; 1. Remove Allen key (using spanner wrench) 2. Remove flexible bushing 3. Use a strap wrench to keep shaft from spinning
Retrieved from "https://strikhedonia.com/Seawind1160Wiki/index.php?title=Removal&oldid=522"