Removal: Difference between revisions

Latest revision as of 10:24, 12 September 2026

General
Description: Removal of the Gori propellers requires the proper Gori tool kit.
Notes

The screws MUST be marked and installed in the EXACT same location, do not mix them up
To remove the locking nut

Reassembly: hardware requiring Loc-tite (243) sealant applied must be allowed to set with adequate time

@@ Line 1: / Line 1: @@
-'''Tips'''<br>
+'''General'''<br>
-# Gori hardware needs Loc-tite (243) applied and allowed to set with adequate time<br>
+Description:  Removal of the Gori propellers requires the proper Gori tool kit.<br>
-# Check for wear; 1. Each pin on each blade 2. Wear on faces of hub 3. Wear on each blade<br>
+'''Notes'''<br>
-# The screws MUST be marked and installed in the EXACT same location, do not mix them up<br>
+* The screws MUST be marked and installed in the EXACT same location, do not mix them up<br>
-# To remove the locking nut; 1. Remove Allen key (using spanner wrench) 2. Remove flexible bushing  3. Use a strap wrench to keep shaft from spinning<br>
+* To remove the locking nut
+:# Remove Allen key (using spanner wrench)
+:# Remove flexible bushing
+:# Use a strap wrench to keep shaft from spinning<br>
+* Check for wear
+:# Each pin on each blade
+:# Wear on faces of hub
+:# Wear on each blade<br>
+* Reassembly: hardware requiring Loc-tite (243) sealant applied must be allowed to set with adequate time<br>