Removal: Difference between revisions
From Seawind1160Wiki
Jump to navigationJump to search
Created page with "'''Tips'''<br> # Gori hardware needs Loc-tite applied and allowed to set with adequate time<br> # Check for wea; 1. Each pin on each blade 2. Wear on faces of hub 3. Wear on each blade<br> # The screws MUST be marked and installed in the EXACT same location, do not mix them up<br> # To remove the locking nut; 1. Remove Allen key (using spanner wrench) 2. Remove flexible bushing 3. Use a strap wrench to keep shaft from spinning<br>" |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
''' | '''General'''<br> | ||
Description: Removal of the Gori propellers requires the proper Gori tool kit.<br> | |||
'''Notes'''<br> | |||
* The screws MUST be marked and installed in the EXACT same location, do not mix them up<br> | |||
* To remove the locking nut | |||
:# Remove Allen key (using spanner wrench) | |||
:# Remove flexible bushing | |||
:# Use a strap wrench to keep shaft from spinning<br> | |||
* Check for wear | |||
:# Each pin on each blade | |||
:# Wear on faces of hub | |||
:# Wear on each blade<br> | |||
* Reassembly: hardware requiring Loc-tite (243) sealant applied must be allowed to set with adequate time<br> | |||
Latest revision as of 10:24, 12 September 2026
General
Description: Removal of the Gori propellers requires the proper Gori tool kit.
Notes
- The screws MUST be marked and installed in the EXACT same location, do not mix them up
- To remove the locking nut
- Remove Allen key (using spanner wrench)
- Remove flexible bushing
- Use a strap wrench to keep shaft from spinning
- Check for wear
- Each pin on each blade
- Wear on faces of hub
- Wear on each blade
- Reassembly: hardware requiring Loc-tite (243) sealant applied must be allowed to set with adequate time
