Removal: Difference between revisions
From Seawind1160Wiki
Jump to navigationJump to search
Created page with "'''Tips'''<br> # Gori hardware needs Loc-tite applied and allowed to set with adequate time<br> # Check for wea; 1. Each pin on each blade 2. Wear on faces of hub 3. Wear on each blade<br> # The screws MUST be marked and installed in the EXACT same location, do not mix them up<br> # To remove the locking nut; 1. Remove Allen key (using spanner wrench) 2. Remove flexible bushing 3. Use a strap wrench to keep shaft from spinning<br>" |
No edit summary |
||
| Line 1: | Line 1: | ||
'''Tips'''<br> | '''Tips'''<br> | ||
# Gori hardware needs Loc-tite applied and allowed to set with adequate time<br> | # Gori hardware needs Loc-tite (243) applied and allowed to set with adequate time<br> | ||
# Check for | # Check for wear; 1. Each pin on each blade 2. Wear on faces of hub 3. Wear on each blade<br> | ||
# The screws MUST be marked and installed in the EXACT same location, do not mix them up<br> | # The screws MUST be marked and installed in the EXACT same location, do not mix them up<br> | ||
# To remove the locking nut; 1. Remove Allen key (using spanner wrench) 2. Remove flexible bushing 3. Use a strap wrench to keep shaft from spinning<br> | # To remove the locking nut; 1. Remove Allen key (using spanner wrench) 2. Remove flexible bushing 3. Use a strap wrench to keep shaft from spinning<br> | ||
Latest revision as of 18:27, 25 May 2026
Tips
- Gori hardware needs Loc-tite (243) applied and allowed to set with adequate time
- Check for wear; 1. Each pin on each blade 2. Wear on faces of hub 3. Wear on each blade
- The screws MUST be marked and installed in the EXACT same location, do not mix them up
- To remove the locking nut; 1. Remove Allen key (using spanner wrench) 2. Remove flexible bushing 3. Use a strap wrench to keep shaft from spinning
