February 23, 2021
With four hours until the inspector arrived it was hustle time to knock off the last few items. First up was installing the lighting and Plexiglas in the right wing tip. After making a few passes on englarging the opening the landing and taxi lights slid right in and from there is was easy going. The wing root fairings were…
February 22, 2021
My work day started at 4:00am and I put in 16 hours getting my plane ready for tomorrows inspection. And yes, I am exhausted. But I should be ready to go after a few hours checking the final items off the list. Today I finally got around to the louvers on the bottom cowling. This was a time consuming process…
February 18, 2021
So I thought I could bang this out in short order. HA! Started the day with more sanding… A bump out/blister was needed for proper clearance from the Vetterman exhaust, this was completed a number of weeks ago and was waiting for final sanding and for the foam mold to be cut out. That wasn’t too big of a job…
February 16, 2021
I finished up the baggage area today. This included riveting the diagonal cover I had to drill out the rivets yesterday due to other rivets I had forgotten to pound… I fabricated a new steel baggage door lever, since the one that was included was 90 degrees off from what I needed. But on the plus side it provided me…
February 15, 2021
One week left until my inspection and so many little things to tighten up. But if feels good to have the finish line in sight. My day begin with circling back to the Vertical Stabilizer/Horizontal stabilizer fairing. I had drilled the holes but they needed to be countersunk and then the final screws installed. Knocked that out and moved on…