Saildrive Seal Replacement

From Seawind1160Wiki
Revision as of 17:34, 9 May 2026 by SwWikiAdminUser (talk | contribs) (Created page with "'''Tips'''<br> #When pulling the bearing carrier out, tabbed locknut will not need to be removed (undo the 5x M6 hex bolts and slid it apart)<br> #Seals should have spacers in between them<br> #Pay attention to how seals are oriented (1 in and 1 out)<br> #Replace the 2x G95 o-rings on the carrier housing<br>")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Tips

  1. When pulling the bearing carrier out, tabbed locknut will not need to be removed (undo the 5x M6 hex bolts and slid it apart)
  2. Seals should have spacers in between them
  3. Pay attention to how seals are oriented (1 in and 1 out)
  4. Replace the 2x G95 o-rings on the carrier housing
Retrieved from "https://strikhedonia.com/Seawind1160Wiki/index.php?title=Saildrive_Seal_Replacement&oldid=394"