Saildrive Oil: Difference between revisions
From Seawind1160Wiki
Jump to navigationJump to search
Created page with "'''General'''<br> Manufacturer: Multiple<br> Type: 80W90W gear oil (API GL-4 or GL-5)<br> Capacity: 2.7L<br> '''Notes'''<br> *Change interval: Every 150 hours of operation or annually<br> *Blown seals: The SD20 is susceptible to blowing the seals if the oil is filled too high. Many have added a vent line to the top of the filler cap. Without the vent, only fill the saildrive oil to the bottom of the dipstick<br> <br> '''Procedure to change oil in the water:'''<br> #..." |
No edit summary |
||
| Line 1: | Line 1: | ||
'''General'''<br> | '''General'''<br> | ||
Manufacturer: | Manufacturer: Valvoline<br> | ||
Type: 80W90W gear oil (API GL-4 or GL-5)<br> | Type: Daily Protection 80W90W gear oil (API GL-4 or GL-5)<br> | ||
Capacity: 2.7L<br> | Capacity: 2.7L<br> | ||
'''Notes'''<br> | '''Notes'''<br> | ||
Latest revision as of 09:19, 17 September 2026
General
Manufacturer: Valvoline
Type: Daily Protection 80W90W gear oil (API GL-4 or GL-5)
Capacity: 2.7L
Notes
- Change interval: Every 150 hours of operation or annually
- Blown seals: The SD20 is susceptible to blowing the seals if the oil is filled too high. Many have added a vent line to the top of the filler cap. Without the vent, only fill the saildrive oil to the bottom of the dipstick
Procedure to change oil in the water:
- Using a pump with a small tube remove as much oil as possible
- Refill oil to full capacity (bottom of dipstick)
- Run engine 5 minutes
- Using a pump with a small tube remove as much oil as possible
- Refill oil to full capacity (bottom of dipstick)
- (This will replace over 75% of the oil)
