January 30, 2025
I’ve been a subscriber of Savvy Avaiation’s SavvyAnalysis since I completed my build in 2021 and from day one it was such a value to have an expert available to ask questions. This is an amazing resource at an inexpensive price! A question came up after a flight a few days ago, first a bit of a back story, I…
January 20, 2025
UPDATE 3/18/2025 In an effort to improve the evenness of the heat and safety, I am redesigning the heating element around 25W resistors mounted on a 1-1/4″ flat bar. I’m still testing to find the best resistor network, stay tuned to the final design. System Description: I decided to build a system that could be remotely controlled via cellular connected…
January 20, 2025
I went through five different methods to heat the silica beads when they needed to be recharged. They all failed to reach to 60°C (140°F) temperature needed to recharge the beads, even though each method on paper looked promising – well the fish tank heater was too hot and would shutdown due to overheating so technically it was hot enough.…
January 19, 2025
Reviewing the parts included in the AntiSplatAero kit I realized that the kit was not developed for the RV-10 and that for all installations, a few extra parts would be necessary. I’m all for a challenge and took this head on. The biggest issue to resolve was the placement of the one-way valve bracket with the Vetterman exhaust system –…